Widely known for its accuracy and exceptionally clean burning, N310 is used by pistol shooters loading a range of calibres – from the .32 S&W Long Wadcutter to the .45 ACP and many others requiring precise pistol loads. N310 is the fastest-burning of our pistol powders and the best choice for the professional Bullseye pistol shooter. Vihtavuori N310, known in the old days as N14, is a single-base, tubular-type powder with grain dimensions of 0.7 mm long and 0.6 mm in diameter. Thanks to its small size and almost symmetrical grain shape, the powder flows smoothly and meters well in loading measures. Like our other N300 series powders, N310 is porous – in fact, one of the most porous of our powders. Porosity is an essential factor determining a powder’s burning properties: the more porous the powder, the faster the burn rate achieved. Vihtavuori N310 is often used for light target loads with light bullets, but it also performs excellently with heavier bullets. As an extremely versatile powder, it is also suitable for loading shotshells – in fact, shotshell manufacturers use it in their top-class cartridges with light 24-gram target loads. N310 is also used by many blank-cartridge manufacturers.

N320, previously known as 3N22, is a fast-burning pistol load powder intended for light and medium-range target loads – cartridges from the 9 mm and .38 Special to the .44 Special and 45 ACP. It can reach a higher velocity at acceptable pressure than N310 and gives the handloader a little more versatility at the loading bench.

N320 is one of our most popular pistol powders and can be used for a wide range of pistol calibres – from the .32 to the .45. It is most often chosen by sport and amateur shooters, such as Cowboy Action shooting participants, but as an extremely reliable powder it is also suitable for service use. It is a tubular-type powder with grain dimensions of 1.1 mm x 0.8 mm (length x diameter) and, like all our load powders, it has an added copper-fouling-reducing additive.

N330 pistol powder gives the pistol shooter broad possibilities, perfectly suited to everything from light target loads to heavier high-velocity loads. It is a versatile powder suitable for an exceptionally wide range of applications – specifically developed for the 9 mm Luger calibre, but also suitable for the .38 Special, .40 S&W, .44 S&W Special and .45 Colt cartridges.

This powder gives the pistol handloader broad possibilities and serves excellently across all shooting disciplines – from light target loads to heavier high-velocity loads. Grain length – 1.0 mm, diameter – 0.8 mm. It is suitable for an exceptionally wide range of sport-shooting applications.

Vihtavuori N340 is a flexible powder, perfectly suited to medium- and high-intensity high-velocity pistol loads. N340 works excellently in high-intensity cartridges such as the .357 and .44 Magnum, 40 S&W and .357 SIG. The wide application range of N340 powder includes, for example, the following pistol cartridges: 9 mm Luger, 9×21 mm, .38 Super Auto, .38 Special, 10 mm AUTO, .44 S&W Special, .45 ACP and .45 Colt.

Previously known as 3N18, N340 is a true multi-purpose powder, originally developed for 9 mm and shotshell loads. This pistol powder is one of the most popular in the Vihtavuori N300 series and can be used for a wide range of calibres and bullet weights, making it an excellent partner for all loading tasks. N340 is especially often used for medium- and large-calibre pistols and shotshells with medium- and heavy-weight loads.

N340 is a tubular-type powder with grain dimensions of 1.0 mm long and 0.8 mm in diameter. This is exactly the same grain size as the N320, N330 and N350 powders – only the powder’s porosity differs. N340’s burn rate is medium on the Vihtavuori pistol-powder scale, and, as with N320, N340 ensures extremely clean burning with no residue.

We reckon that even Dirty Harry himself might have used Vihtavuori N350 in his famous .44 Rem Mag – after all, his aim simply never misses!

Vihtavuori N350 is the slowest-burning powder in the N300 series group of pistol powders. It is ideally suited to very heavy loads and to the highest velocity and energy across a wide range of pistol and revolver cartridges. The grain size (1.0 mm long and 0.8 mm in diameter) is exactly the same as the N320, N330 and N340 powders – it is precisely the powder’s porosity that accounts for all the differences in burning properties. N350 is perfectly suited to powerful loads, for example in the 9 mm Luger, 10 mm AUTO and .45 ACP calibres. Thanks to its slow burn rate, it is ideally suited to very heavy loads and the highest velocity and energy across a wide assortment of pistol and revolver cartridges. N350 is widely used in pistol shooting, especially practical shooting.

Vihtavuori 3N37 pistol powder was originally developed for .22 rimfire cartridges, but later proved to be extremely versatile and in demand across all pistol-shooting competition disciplines.

Vihtavuori 3N37’s burn rate is very similar to N350, so it can be used in many of the same applications. When pistol shooters began experimenting with 3N37 in loading, they noticed that this fine-grained powder meters evenly in measures and delivers excellent results for a variety of competition cartridges used in the USPSA and IPSC practical-shooting disciplines.

3N37 is a tubular-type, porous powder with grain dimensions of 0.6 mm long and 0.6 mm in diameter. Its symmetrical grain shape ensures smooth metering in powder measures. 3N37’s burn rate is close to N350 and falls in the medium part of our pistol-powder scale.

It is an excellent powder for 9 mm major loads in IPSC open competition, widely used in the USPSA and IPSC practical pistol-shooting disciplines. Beyond practical shooting, 3N37 is also widely used as a submachine-gun powder. Like all our powders, 3N37 ensures stability, exceptional accuracy and clean burning – which is exactly why the world’s best shooters choose it.

Interesting fact: as far back as the 1940s, 3N37 was used by the Sako manufacturers for loading 9 mm submachine-gun cartridges.

Vihtavuori 3N38 powder is specially developed for competitive pistol shooting with high-velocity loads in 9 mm and .40 S&W cartridges. It is a single-base, tubular-type powder belonging to our group of fine-grained powders (0.6 mm long x 0.6 mm in diameter).

3N38 is a popular powder for practical shooting, especially among IPSC and USPSA shooters. As a relatively slow-burning powder, 3N38 is an excellent choice for producing Major loads – it ensures the good accuracy and clean burning for which Vihtavuori is widely known.

N110 is the fastest-burning powder on our rifle-powder scale, making it a versatile product suitable for both pistol and rifle loads. It ignites best with small rifle primers and is especially well suited to small rifle cases such as the .22 Hornet and .30 Carbine, as well as Magnum-class pistol and revolver cartridges – the .357 S&W Magnum, .41 Magnum, .44 Magnum, .454 Casull and .500 S&W. It works exceptionally well for similar high-performance revolver cartridges. This powder is one of the favourites for hunting and varminting loads.

Vihtavuori N120 powder is ideally suited to small-calibre cartridges with light bullets and to short-barrelled rifles, especially the .222 Remington and 7.62×39. Previously known as N 21, this powder is widely recognised and used even by the Finnish Army.

N120’s burn rate on our powder scale is fast – slightly slower than N110. Vihtavuori N120 requires higher pressure than N110 for optimal burning. The grain size is the smallest in our entire powder family: just 0.8 mm long and 0.6 mm in diameter. As with our other fine-grained powders, this ensures very easy charging and use in powder measures.

Vihtavuori N120 powder is chosen by many sport shooters, short-range target shooters and small-game hunters.

Vihtavuori N130 powder, previously known as N303, is a versatile powder suitable for various rifle calibres, especially for small-game hunting and target shooting.

N130 is used in many factory-loaded .22-calibre and 6 mm PPC cartridges. It is also perfectly suited to handloading with lighter bullets in the .222 and .223 Remington calibres, as well as straight-walled rifle cases such as the .45-70 Government and .458 Winchester Magnum.

N130 is a single-base, tubular-type powder with grain dimensions of 1.0 mm long and 0.6 mm in diameter. On our powder scale its burn rate is relatively fast. Interesting fact: the grain size of N130 is exactly the same as N133 and N135, but due to different surface coatings the burning properties of these powders differ.